laminates
Metallised film transfers, with or without thermo-adhesive.
Use
Leather finishing.
Terms of usage
Prior to foil transfer, it is necessary to apply a polyurethane resins pre-treatment onto the leather.
Hot stamping with rotary press. Transfer temperature: between 85 °C and 95 °C according to the processing speed. NB.: an excessive temperature leads to an alteration of the foil with consequent loss of brightness.
Packaging
The film is wrapped in reinforced cardboard tubes, with an inside diameter of 76 mm and it is protected by a cardboard box.
Storage method
the product is stored in a closed packaging and kept in a dry place, at a temperature comprised between +15 °C and 25 °C . It fears humidity. Do not overlap materials or weights and store in vertical rolls. Use the product if possible within 4 months.
Technical data
width:
1600 mm
length:
300 m
core:
76 mm
thickness:
19/50 µm poliestere
Resistances
as tests performed by the producing company
Scotch Test: Excellent resistance
Veslic Test: very good rub resistance
Resistance tests must be performed 12 hours later after transferring.
Note: The product complies with all UE regulations.
Special warnings: We are available to suggest you the best product to use for leather pre-treatment, from which depends the quality of the final result of the foil itself. We strongly recommend to perform always print/transfer tests onto the supports which you intend to use in order to determine process parameters and desired final results. In relation to the product possible and multiple methods and scopes of application we do not assume any responsibility in case of misuse.
